International
Mod CO2 sensor
- Assesses occupancy level in a room by measuring the CO2 content.
- Easy to install.
- Just 3 wires needed for data + power supply.
- Automatic re-calibration – no maintenance.
- Well-suited to large volume spaces.
- Single zone and multiple zones.
- Principle: measure absorption of infra-red rays to determine CO2 concentration in a room.
- CO2 measurement not affected by dust and water vapor.
- Sensor measurement range: 0 to 2000 ppm.
- Trip level: 1100 ppm by default (can be adjusted to between 700 and 1700 ppm by increments of 200 ppm using a selector switch).
- Output signal proportional to ambient concentration measured.
- Response time < 7 minutes.
- Sensor power consumption: 500 mA.
